|
Management Tools |
 |
| |
FenceAlert |
 |
|
| The Stafix FenceAlert is a simple but ingenious device designed to emit a flashing light as soon as it detects low voltage or loss of power. Clip it on to fence wire or tape for early warning of fence faults. |
|
|
| • |
Warning light begins flashing when voltage is too low to be effective |
| • |
Can be seen up to 1.5km (1mi) away |
| • |
Robust, impact and water-resistant case designed to withstand extensive periods in the outdoors |
| • |
Audible current indicator |
| • |
Can be used on any type of electric fence including wide poli-tape |
| • |
Works with all pulsed Energizers |
| • |
No ground wires or external power sources required |
| • |
Replaceable CR2032 lithium button cell battery |
| • |
Battery: 5 years on standby or up to 2 weeks of continuous flashing |
| • |
Available as a pack of six (FSTFAM) |
|
|
|
| |
|
|
|
| |
|
|
 |
I would like to know more about the FenceAlert. Add this to my Enquiry
Basket. |
|
|
|
|
 |
Use the pull down menu below to
locate stores for a specific region. |
| |
|
|
|
|
To get the maximum performance from an Energizer you need to be able to measure and monitor your fence system effectively. No matter how good an Energizer is, if the fenceline is badly insulated, has shorts, or has bad earthing, it will perform below its optimum.
Recent advances in remote and fault-finding technology mean you can quickly locate and fix faults on your fence with the minimum of fuss. Monitoring fence performance has also taken a big step forward with the introduction of the Stafix FenceAlert which flashes should a fence be performing poorly. Such innovations are taking fence maintenance to new levels of practicality and ease.
|
| 
|
|
Print 
